• Why do stones need to be surface treated?

    2019-12-06
    The reason why the natural stone will be surface treated and then presented in the indoor space, I think there are at least three reasons: 1. Satisfy the safety of the stone itself: Since the stone is a natural material, if it is not surface treated, it is easy to return to alkali, yellowing or even weathering due to chemical reaction after leaving the factory. 2. Satisfy the functionality: differ...
    continue reading
  • Eight advantages of stone in modern architecture

    2019-11-07
    With the changes of the times, the improvement of human aesthetic taste and the pursuit of uniqueness, stone, because of its natural attributes, can satisfy people's pursuit of permanent and unique inner desires. Eight advantages of stone in modern architectural decoration First, noble and elegant The stone has the characteristics of noble and elegant, bright and crystal, hard and permanent. Diffe...
    continue reading
  • Dry Installation Method of Marble Wall Tile

    2019-10-12
    Dry installation method of marble wall tile is usually used for building outer wall decoration. Here are detail process about this method. 1.Measure and locate the position, punch holes in the wall with the electric drill. 2.Prepare 4 expansion screws for each marble tile. 3.Use a hammer to knock the expansion screws into the pre-drilled holes. 4.Using the wrench to install the fastener on the exp...
    continue reading
  • How to maintain & clean granite countertops

    2019-10-12
    Let's learn 5 easy steps to maintain and clean your granite countertops. Step 1, Clean liquid dropped on the countertop in time. Use dish towel or soft tissue to eliminate liquid dropped on the countertop surface in time, especially the acid liquid, like soda, orange juice, alcohol etc. And then use a wet soft cloth to clean the surface again to keep all the dropped liquid off the countertop. Time...
    continue reading
  • What should we do if there is no gloss after the marble is polished?

    2019-09-20
    After the marble is polished, there is no gloss. You need to polish and polish with a finer polishing pad. Marble polishing is the last process of stone care crystal surface treatment or the last process of stone light board processing. It is one of the most important process of stone care today! The methods of marble care can be divided into: 1: Refurbished grinding treatment. 2: Local drop proce...
    continue reading
  • How to identify dyed marble?

    2019-09-11
    How to identify dyed marble? Although the phenomenon of decorative stone staining is common in the market, as long as the consumer pays attention, it is not difficult to detect the bottom. For example, natural stone will have color difference, and dyed stone tends to be dark and uniform in color, with small color difference, and the surface gloss is not natural, and it is relatively rigid. The mos...
    continue reading
  • What is the high temperature resistance of quartz?

    2019-09-11
    The proportion of quartz in home decoration stone is getting higher and higher, especially the use of cabinet countertops is the most common in home decoration, and the problem of leakage is more obvious, such as bursting and partial discoloration. Quartz stone plates are composed of more than 93% natural quartz and about 7% of colorants, resins and other additives to adjust adhesion and curing. T...
    continue reading
first << 1 2 3 4 5 last

a total of5 pages

SEND A MESSAGE

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

    contact with us :

  • facebook
  • linkin
  • Twitter
  • youtube

Copyright © globalstonesite.com All Rights Reserved.

   

the professional team to service !

chat now

live chat

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!